Designed & Manufactured by Teamnet

Full-Height Turnstiles. Built from the circuit board up.

Name: Teamnet MAX-2000 Dual-Lane Full-Height Turnstile
Brand: Teamnet

We don't resell someone else's hardware. We design the PCB, write the firmware, fabricate the steel, and build the enterprise software it connects to. One company. Full stack. Zero gaps.

Request a Quote Hardware & IoT Platform

SUS304Stainless Steel

IP54Ingress Protection

5MCycle MCBF

24/7Outdoor Rated

Product Lineup

Two models. Every perimeter covered.

Single-lane for controlled entry points. Dual-lane for high-throughput gates. Both built to the same industrial standard, both natively connected to your Teamnet platform.

MAX-1000

Single-Lane Full-Height Turnstile

Controlled single-direction entry for gates, building entrances and restricted zones. Compact footprint with the same industrial-grade construction as the dual-lane.

Single lane, 600mm width

SUS304 stainless steel

Anti-tailgating

Fire safety mode

Biometric reader panels

Indoor / outdoor rated

Flagship

MAX-2000

Dual-Lane Full-Height Turnstile

Simultaneous entry and exit through a closed dual-channel enclosure. 120-degree brake rod geometry with full capping design. Built for high-throughput, high-security perimeters.

Dual lane, 600mm each

30 persons/min per lane

Anti-tailgating per lane

Fire safety mode

120° brake rod angle

Full capping waterproof

Engineering Details

Built for the harshest environments

Factory gates, open-air perimeters, coastal installations, desert compounds. These turnstiles are designed for Indian conditions and built to outlast them.

SUS304 stainless steel construction throughout. Cabinet and barrier arms both built from the same marine-grade alloy. No painted mild steel that rusts in six months.

IP54 ingress protection with full capping design. Dust-tight and splash-proof from any direction. Deployed outdoors without shelter.

Anti-tailgating mechanism ensures one authentication per person. The brake locks after each passage - no piggybacking, no buddy punching.

Fire safety mode - barrier arms rotate freely the instant power is cut. Ensures unobstructed evacuation during emergencies. No manual override needed.

Modular reader panels accept fingerprint scanners, face recognition terminals, RFID card readers, QR code scanners, or any combination - swappable without replacing the turnstile.

5 million cycle MCBF. At 1,000 passes per day, that is over 13 years of continuous operation before the mechanism needs service.

-28°C to 60°C operating range. From Himalayan defence installations to Rajasthan industrial corridors to humid coastal ports.

LED direction indicators on each lane clearly signal entry/exit/blocked status. Visible in direct sunlight and low-light conditions.

Specifications

MAX-2000 Technical Specifications

MAX-2000 — Dual-Lane Biometric Full-Height Turnstile

Power Requirements	AC 110V / 220V, 50/60Hz
Working Temperature	−28°C to 60°C
Working Humidity	0% to 95%
Environment	Indoor / Outdoor
Throughput	Max 30 persons / minute per lane
Lane Width	600 mm
Dimensions (L × W × H)	2300 × 1500 × 2300 mm
Cabinet Material	SUS304 Stainless Steel
Barrier Material	SUS304 Stainless Steel
Barrier Movement	Rotating (120° brake rod)
Emergency Mode	Free rotation on power loss
Security Level	高
MCBF	5 million cycles
Ingress Protection	IP54
LED Indicators	Supported

Native Integration

Not just hardware. A connected system.

Every turnstile event flows into your enterprise platform in real time. Attendance, access control, security alerts, payroll - all from the same data stream.

👤

Employee taps in Biometric, card, QR

→

⚙

Teamnet Turnstile Validates, logs, passes

→

⚡

Real-time sync Instant platform event

WeFirst HRMS - Attendance auto-marked. Late arrivals, early departures, overtime and shift handovers calculated instantly. Feeds directly into leave balance and payroll.

海军盾 - Zone-based access rules enforced at the gate. Restrict areas by role, shift, training status or clearance level. Every denied entry is logged and alerted.

Visitor management - Pre-registered visitors get a QR pass. The turnstile validates it, logs entry time, and notifies the host. No reception desk bottleneck.

Contractor tracking - Gate passes with expiry dates. The turnstile enforces validity automatically. No expired contractor walks onto your site unnoticed.

Emergency muster - Real-time headcount from turnstile data. During evacuations, know exactly who is inside the facility and who has exited. No manual roll calls.

工资单 - Hours worked, overtime, night shift differentials - all computed from gate data. Zero manual timesheets. Zero disputes.

Teamnet Electronics Lab

From PCB design to finished product.

Most enterprise software companies buy hardware off a shelf and write a driver. We run an in-house electronics lab that designs circuits, lays out PCBs, builds prototypes, writes firmware, and manufactures finished products. The turnstile you deploy is the same one we designed, tested, and assembled.

Circuit designSchematic capture and component selection for industrial-grade reliability. Every design reviewed for thermal, EMI and power integrity.

PCB layout & fabricationMulti-layer board layout, prototyping and production runs. From single-sided controllers to complex multi-layer IoT modules.

Firmware developmentBare-metal and RTOS firmware for ARM and RISC-V microcontrollers. Secure boot, OTA updates, and encrypted communication built in.

Mechanical engineeringSheet metal design, CNC machining, welding jigs and assembly tooling. The cabinet, the mechanism, the mounting - all designed in-house.

Quality & testingEnvironmental stress testing, endurance cycling, ingress testing and field validation. Every unit tested before it leaves the facility.

Platform integrationThe same engineers who build the hardware write the software drivers. No translation layer, no third-party SDK, no impedance mismatch.

Full-Stack Hardware

One company. Every layer.

From the first schematic to the last line of enterprise code, there is no handoff to a third party. This is why our hardware and software work together seamlessly.

✎ Design Circuit schematics, PCB layout, mechanical CAD

⚙ Prototype Board fabrication, component assembly, bench testing

🔌 Firmware Embedded code, communication protocols, security

🔧 Manufacture Production assembly, quality control, stress testing

💻 Software Platform drivers, dashboards, API endpoints

🚀 Deploy Site installation, commissioning, OTA updates

Custom Hardware

Need something that doesn't exist yet?

Our electronics lab builds custom hardware for enterprises with requirements that off-the-shelf products cannot meet. If you can describe it, we can design, manufacture and integrate it.

Custom IoT devices - Sensors, controllers and edge nodes designed for your specific environment, protocol requirements and form factor constraints.

Industrial controllers - PLC replacements, relay boards, motor drivers and signal converters designed for your exact production line.

Access control hardware - Turnstiles, boom barriers, bollards, door controllers and intercom systems tailored to your site security requirements.

Environmental monitoring - Gas detection, water level sensing, fire detection, temperature monitoring and alert systems for hazardous or regulated environments.

Defence & government grade - Ruggedised hardware with NATO codification (NCAGE), built for classified and high-security installations.

Always platform-native - Every custom device we build ships with a Teamnet driver. It appears in your ERP, your dashboards and your reports from day one.

Certifications & Compliance

Standards that matter

ISO

ISO 9001:2015Quality Management System

ISO

ISO 27001:2013Information Security

MII

Make in IndiaDesigned & manufactured in India

NATO

NATO CodificationNCAGE registered

IP69

IP54 / IP66 / IP67 / IP69Dust-tight, jet-wash & submersion rated